Battery Protection Circuit Module (BMS/PCM) for 7S 22.4V LiFePO4 Battery Packs
Features and Benefits
1.Protection Circuit Board for 25.6V 8S LiFePO4 battery pack;
2.PCM applies for 8 cells LiFePO4 battery pack with E-Switch integrated, E-Switch can totally turn off the output;
3.To prevent the battery packs from overcharge,overdischarge,over current, over temperature ,short circuit ;
4.With cell balance/equilibrium function;
5.Compatible with LiFePO4 cells;
6.How balancing function works? After battery pack is fully charged. PCM will detect each cell's voltage and trim higher voltage down until other cells reach the same voltage level. Therefore, it helps cells have longer service life.
7.PCM comes with all the voltage detection wires and connectors.
Specifications
Item |
Contents |
Criteria (Adjustable) |
|
1 |
Model |
EL00780 |
7S-200A working current |
2 |
Voltage |
Charging voltage |
25.2V |
3
|
Current |
Maximal continuous charging current |
200A/50A |
Maximal continuous discharging current |
200A/240A |
||
Current consumption |
≤100μA |
||
4
|
Overcharge Protection |
Over charge detection voltage |
3.6V~3.9V(Adjustable) |
Over charge detection delay time |
0.5-1.5S |
||
Over charge release voltage |
3.5V~3.8V(Adjustable) |
||
5
|
Over Discharge Protection |
Over discharge detection voltage |
2.0V~2.5V(Adjustable) |
Over discharge detection delay time |
0.5-1.5S |
||
Over discharge release voltage |
2.0V~2.5V(Adjustable) |
||
6
|
Discharge Over Current Protection |
Over current detection current |
Adjustable |
Detection delay time |
600-1000ms |
||
Release condition |
Cut load & charge to recover |
||
7
|
Charge Over Current Protection |
Over current detection current |
Adjustable |
Detection delay time |
800-1200ms |
||
Release condition (delay: 500ms) |
Disconnect the charger |
||
8
|
Short Circuit Protection |
Short circuit detection current |
actual testing is needed |
Detection delay time |
600-1400us |
||
Detection condition |
Cut load/charge to recover |
||
9
|
Balance |
Balance voltage for single cell |
3.5±0.015V |
Balance current for single cell |
35mA±5mA |
||
10
|
Temperature Protection
10KNTC B=3435
|
Charge Over Temp Protection |
78℃±5℃ |
Discharge Over Temp Protection |
78℃±4℃ |
||
Charge Under Temp Protection |
-40℃±5℃ |
||
discharge Under Temp Protection |
-40℃±4℃ |
||
11 |
Resistance |
Inner resistance P- B- |
≤5mΩ |
12
|
Temperature |
Operating temperature range |
-40 ~ +85°C |
Storage temperature range |
-40 ~ +85°C |
||
13 |
Size (L*W*T) |
L240mm*W127mm*T22mm (including heat-sink on top of BMS) |