PCM/PCB for 4S 14.8V Laptop Battery Packs
Features and Benefits
*Note:Characteristics subject to change without notice.
*Software Protection including:
1.Over Charge Voltage Protection;
2.Over Charge Current Protection;
3.Over Discharge Voltage Protection;
4.Over Discharge Current Protection;
5.Charge Over Temperature protection;
6.Discharge Over Temperature protection;
* Voltage/Temperature Calibration:During operation after calibration, The difference for Battery Pack's voltage must<±40mv;The difference for single cell's voltage must<±20mv,the difference for the Temperature must<±1°C;
Specifications
|
Item |
Contents |
Criteria (Adjustable) |
|
|
1 |
Model |
HCX-B149 |
4S-5A working current |
|
2 |
Voltage |
Charging voltage |
16.8V |
|
3 |
Capacity designed |
Battery Pack’s Capacity |
(adjustable) |
|
4 |
Communication |
Communication Mode |
SMBus |
|
5 |
Current |
Maximal continuous charging current |
5A |
|
Maximal continuous discharging current |
5A |
||
|
Current consumption |
≤100μA |
||
|
6 |
Overcharge Protection |
1st Over charge detection voltage |
(adjustable) |
|
1st Over charge detection delay time |
2S |
||
|
1st Over charge release voltage |
(adjustable) |
||
|
2nd Over charge detection voltage |
(adjustable) |
||
|
2nd Over charge detection delay time |
1.5S |
||
|
7 |
Over Discharge Protection |
Over discharge detection voltage |
(adjustable) |
|
Over discharge detection delay time |
2S |
||
|
Over discharge release voltage |
(adjustable) |
||
|
8 |
Over Current Protection |
Over current detection current on discharging |
(adjustable) |
|
Detection delay time |
2S |
||
|
Over current detection current on charging |
(adjustable) |
||
|
Detection delay time |
1S |
||
|
Over current Release condition |
0mA 5S |
||
|
9 |
Short Circuit Protection |
Detection condition |
Exterior shot circuit |
|
Detection delay time |
/ |
||
|
Release condition |
Cut load,automatically recover |
||
|
10 |
Balance |
Balance voltage for single cell |
/ |
|
Balance current for single cell |
/ |
||
|
11 |
Resistance |
Inner resistance |
≤20mΩ |
|
12 |
Temperature Protection |
Charge over temperature protection |
(adjustable) |
|
Charge under temperature protection |
(adjustable) |
||
|
Discharge over temperature protection |
(adjustable) |
||
|
Discharge under temperature protection |
(adjustable) |
||
|
13 |
Size (L*W*T) |
L70 x W33.8 x T4 mm |
|
Connection Diagram
Interface definition
|
Interface |
Description |
|
P- |
Connect to the negative terminal of the Load, This port is a large current port. Please select the appropriate wire according to the load current |
|
BATT-(B-) |
Connect to the negative terminal of the Battery. This interface is a large current interface. Please select the appropriate wire according to the load current |
|
3.7V(B1) |
1st cell+, 2nd cell- 3.6V |
|
7.4V(B2) |
2nd cell+, 3rd cell- 7.2V |
|
.. .. |
|
|
B+ |
3rd cell+ 10.8V |
|
P+ |
Connecting to the positive pole of the power supply when charging and the positive pole of the load when discharging, Please select the appropriate wire according to the load current |
|
PRSE |
GND - Output, No connection - no output on P+/P- |
|
TH |
10K NTC GND |
|
SLC |
Communication clock port |
|
SDA |
Communication data interface |
Wiring diagram
