Home->PCM for LiFePO4 Battery Packs ->For 6S~10S Packs (19.2-32V)-> For 9S Packs (28.8V)

Battery Protection Circuit Module (BMS/PCM) for 9S 28.8V LiFePO4 Battery Packs

Part number: HCX-D805

Features and Benefits

1.Protection Circuit Board for 28.8V 9S LiFePO4 battery pack;

2.PCM applies for 9 cells LiFePO4 battery pack with E-Switch integrated, E-Switch can totally turn off the output;

3.To prevent the battery packs from overcharge,overdischarge,over current, over temperature ,short circuit ;

4.With cell balance/equilibrium function;

5.Compatible with LiFePO4 cells; 

6.How balancing function works? After battery pack is fully charged. PCM will detect each cell's voltage and trim higher voltage down until other cells reach the same voltage level. Therefore, it helps cells have longer service life.

7.PCM comes with all the voltage detection wires and connectors.

8. This BMS is programmable but only setup before shipping in BesTech.

Specifications

Item

Contents

Criteria (Adjustable)

1

Model

HCX-D805 / 367309

9S-120A working current

2

Voltage

Charging voltage

32.4V

3

Current

Maximal continuous charging current

90A/50A

Maximal continuous discharging current

90A/120A

Current consumption

≤60μA

4

Overcharge Protection

Over charge detection voltage

Programmable

Over charge detection delay time

0.5-1.5S

Over charge release voltage

Programmable

5

Over Discharge Protection

Over discharge detection voltage

Programmable

Over discharge detection delay time

0.5-1.5S

Over discharge release voltage

Programmable

6

Discharge

Over Current Protection

(1st Protection)

Over current detection current

R=0.5mR/70

Programmable

Detection delay time

1s±350ms

Release condition

Cut load & charge to recover

7

Discharge

Over Current Protection

(2nd Protection)

Over current detection current

R=0.5mR/140

Programmable

Detection delay time

20ms±6

Release condition (delay: 100ms)

Cut load & charge to recover

8

Charge

Over Current Protection

Over current detection current

R=0.5mR/30

Programmable

Detection delay time

0.2s

Release condition (delay: 500ms)

Disconnect the charger

8

Short Circuit Protection

Short circuit detection current

580A (actual testing is needed)

Detection delay time

200-500us

Detection condition

Cut load/charge to recover

9

Balance

Balance voltage for single cell

3.5±0.015V (Programmable)

Balance current for single cell

36mA±5mA (Programmable)

10

Temperature Protection

 

10KNTC B=3435

 

Charge Over Temp Protection

55℃±4

Discharge Over Temp Protection

75℃±4

Charge Under Temp Protection

-7℃±4

discharge Under Temp Protection

-25℃±4

Temp. Protection delay

2S±1S

11

 

Sensor wires disconnection Detection

YES

12

 

High voltage protection on single Cell

4400mV (Programmable)

13

 

Low voltage charging prohibited voltage

1000mV (Programmable)

14

Resistance

Inner resistance P- B-

≤5mΩ

15

Temperature

Operating temperature range

0 ~ +85°C

Storage temperature range

0 ~ +85°C

16

Size (L*W*T)

L150mm*W75mm*T15mm (including heat-sink on top of BMS)

Copyright © 2011 BesTech Power Co., Ltd.
Tel:+86 - 769 82033052     Fax:+86 - 769 82033050 # 620   E-mail:info@BesTechPower.com
Factory ShenZhen: 3F, Bldg3, Fulian Industrial Park, Heping Industrial area, Jianhui Rd, Longhua, ShenZhen, China 518109.
Factory DongGuan: 3F, Block 1, HaoYun TongYuan Science Park, Qiaojiao Middle Road #1, TangXia Town, DongGuan, China 523726.